How Important Are The Starter Motors?

You as well as your car and all your plans that involve traveling would come to a standstill, if the starter motors of the vehicle go bad. This is the first component in the vehicle that activates as soon as the "Start" button is pressed. Therefore it is very important to keep in perfect condition and this could be done very easily once you know the entire functioning of the vehicle and this is what we have come up with this post.

Engaging the Triggering Switch

• According to car servicing experts, the first task of starter motors is to engage the trigger switch and this happens as soon as the "Start" button is pressed or key is turned towards "Ignition". 
• This triggering means that the electrical energy will be pulled from the car battery and sent towards the starter solenoid.
• Remember that this happens with the help of starter motors and if there’s no current moving from the battery to the starter solenoid, the engine can’t get going.

The Starter Solenoid

• As far as the starter solenoid is concerned, in most cases, it is in the shape of a small cylinder and it acts as a magnet when charged with an electrical current.
• The main task of this part in the vehicle is to send current towards the starter motors and when the vehicle is starting; this solenoid receives the current from the battery and sends it towards starter motors.

Tips for Caring For Your Starter Motor:

• Make sure that all the connectors aren’t corroded, dirty or grimy

• Clean the solenoid and the terminals so that the connections are not compromised

• Make sure the pinion gear and flywheel aren’t damaged

Learn More

• Important Tips Related To Getting Clutch Replacement Done
• Types of Car Servicing Offered By Australian Companies
• How Do Brakes Work And How To Maintain Them?

Facts You Should Be Aware Of Regarding Dying Batteries

People are full of myths and misconceptions regarding the topic of why does a car battery die and upon asking 10 different people, you will get 10 different replies. Therefore, we have come up with a post, where we have discussed as to why does this component inn vehicle die and the first answer and also the most common one is that when the active material in the plates can no longer hold the discharged current, the battery "dies". Other than this, a number of factors influence this and here in this post, we have come up with some of them.

Fact # 1

• In an SLI battery or the Starting, Lighting and Igniting battery, the active positive plates shed off their power with the advancing age. 
• It could also happen because of the normal contraction and expansion that occurs during the discharge and discharge cycles.
• According to the sellers of century batteries Norwest, the contraction taking place there results in the loss of plate capacity and also assists the sludge in getting formed there.
• This sludge or mud-like thing also has a huge role in decreasing the life of the car batteries.

FACT # 2

• Other than the contraction, one more thing responsible for the death of batteries, particularly in hot climate areas is the "positive grid growth" or “positive grid metal corrosion".
• Sellers of century batteries Kellyville say that other reasons of the death of a car battery are negative grid shrinkage, buckling of plates or loss of water. 
• Other factors that contribute into this are deep discharges; heat, vibration, fast charging, and overcharging all accelerate the "aging" process.
• An estimate says that more than 50 percent batteries die prematurely because of one of any of the reasons mentioned above.
• other than this, the loss of water for normal recharging charging due to the lack of maintenance, evaporation from high under hood heat, or overcharging are also very important role players as far as the death of a battery is concerned. 

Important Maintenance Tips Related To Deep Cycle Batteries

Modern-day cars are on a verge of becoming self-dependent because of the advancement in science and technology has been helping them a lot by offering new and better components every now and then. One such component is the deep cycle batteries that are found in a maximum number of cars these days. Though they come with numerous benefits, still the fact remains the same that they require timely maintenance and look after for performing flawlessly for a long time. Here in this post, we take a look at some points related to the maintenance of deep cycle batteries.

Checking the Charge

• According to the experts, the first thing to do is checking the charge of the battery almost every week as this way, you will not find yourself running out of power one day.
• In terms of charging, one thing to know is that these deep cycle batteries tend to discharge about 50-75 percent of its capacity based on the manufacturer.
• The question is how to check the charge and the answer is that there are plenty of tools to do this through DIY, but it is recommended to get it done by a reputed car mechanic present around you.
• You can use tools such as voltage indicating digital monitors, hydrometers, and amp-hour meters to check the charge.
• You should use battery chargers for recharging when they indicate a 50% charge, but never let them get lower than 20% to ensure a long life.

Prevent Sulfation

• According to the sellers of dual battery systems, the biggest issue related to deep cycle batteries like lead-acid batteries is that there is always a risk of sulfation, if left uncharted for a long time.
• In this regards, experts say that you should prevent this from happening by keeping the battery charged following the discharge recycle.
• Make sure to have periodic charge cycles to keep your battery healthy.

Some important tips related to the maintenance of deep cycle batteries are – 

• Avoid Stratification
• Give Your Battery a Cooling Off Period
• Equalization is Key in Deep Cycle Batteries

Top Inclusions Of General Car Servicing

In terms of servicing of vehicles, the first thing to understand is that in Australia, it is offered in different forms. Therefore, it could be confusing for anyone to know that actual content of a general servicing. Therefore, we have come up with a post that discusses the main inclusions of a general car servicing.

Replacing the Cam Belt

• Dealers and sellers of century batteries Norwest say that replacement of the cam belt is the most common inclusion in all kinds of servicing including those involving pink slips Norwest.
• Some people think that it is not an essential thing but once replaced, you can immediately sense the difference in that car’s movement and there, you will realise the importance of this replacement.

Repairing the Hydraulic Cylinder

• he next very important inclusion in general servicing is the replacement or repair of hydraulic cylinder and this would ensure that the oil reaches all parts of the engine really well.
• This will help you a lot in the efficient functioning of the vehicle and the fuel efficiency you will experience would be totally unmatched.
• In the absence of a properly functioning hydraulic cylinder, you will see a huge difference in the overall functioning of the vehicle.
• Therefore, it’s important that during general inspection, this part is checked and if any flaw is detected, it is removed immediately and the machine is brought into its original form.

Diagnosing Any Start-up Trouble

• Those who re-gas A/C say that during the general servicing, it is very important that any issues related to vehicle’s start-up are removed.
• Often car owners think that this is something that will never experience any issue until one day when they face a major trouble and they are left with the only option of seeing a car mechanic.
• In some serious cases, they might also get forced to leave the vehicle at the service centre because the mechanism failure needs more time than imagined in its rectification.